Understanding the YR05796 Discoloration Shaker: Compatible Consumables, Spare Parts, and Accessories
The YR05796 Discoloration Shaker is a versatile and essential tool in various laboratory settings, particularly for tasks involving sample homogenization, analysis, and other applications that require precise mixing. This article delves into the compatible consumables, spare parts, and accessories that enhance the functionality of the YR05796 model, ensuring consistent results and prolonged operational efficiency.
Technical Data of the YR05796 Discoloration Shaker
| Specification | Detail |
|---|---|
| Model | YR05796 |
| Mode of agitation | Reciprocating |
| Control | Microcomputer PID Control |
| Display | LED Digital Display |
| Amplitude | 30 mm |
| Frequency (rpm/min) | 15-240 |
| Sensitivity (rpm) | +2 |
| Timer | 0-99 hours 59 minutes |
| Tray number | 1 |
| Power | 30W |
| Power Supply | AC 90-260V, 50-60Hz |
| Operating Temperature | -10 °C to 65 °C |
Compatible Consumables for YR05796
To maximize the performance of the YR05796, it is essential to know which consumables are compatible. These include various types of plates, reagent solutions, and sample containers that can be used without compromising the shaker's function.
Some essential consumables include:
- Sample tubes: Compatible with various tube diameters to ensure efficient mixing.
- Reagents: Specific chemical solutions that can be used in conjunction with the shaker.
- Microcentrifuge tubes: These are typically used for small volume samples.
Spare Parts for YR05796
To ensure the longevity and reliability of the YR05796 Discoloration Shaker, it is crucial to be aware of the spare parts that may require replacing over time. Regular maintenance can prevent significant malfunctions and extend the unit's lifespan.
- Drive belts: Essential for the motion of the shaking mechanism.
- Motor units: Replacement motors can help restore performance if the original motor fails.
- Control panels: Upgrading or replacing the control panel may enhance operational efficiency.
Essential Accessories for Enhanced Functionality
In addition to consumables and spare parts, several accessories can enhance the functionality of the YR05796, making it suitable for a wide range of laboratory applications.
- Vibration-dampening pads: These pads can stabilize the shaker during operations.
- Calibration weights: Used for ensuring the precision of the shaker's performance.
- Protective covers: These can protect the shaker from dust and spills when not in use.
Installation and Setup of YR05796
The installation and initial setup of the YR05796 is straightforward but requires attention to detail to ensure optimal performance. Below are the steps involved in the proper setup:
- Unboxing: Carefully remove the shaker from its packaging, ensuring all components are intact.
- Leveling: Use a spirit level to ensure the shaker is on a flat surface to prevent operational issues.
- Power Connection: Connect the unit to a power supply within the specified voltage range.
- Calibration: Run the calibration procedure as per the user manual to ensure accurate measurements.
Troubleshooting Common Issues with YR05796
Even with proper care, issues may arise with the YR05796. Here are common problems along with potential solutions:
| Symptom | Potential Cause | Solution |
|---|---|---|
| Equipment does not power on | Power connection issues | Check the power cord and outlet. |
| Error code E-03 | Overload detected | Remove excess weight from the tray and reset. |
| Inconsistent readings | Calibration required | Recalibrate the shaker according to the manual. |
Frequently Asked Questions
What types of consumables can I use with the YR05796?
You can use various sample tubes, reagents, and microcentrifuge tubes with the YR05796. Ensure that they fit the unit's specifications for optimal performance.
How do I maintain the YR05796 for optimal performance?
Regularly check and replace drive belts, motor units, and control panels as necessary. Also, ensure the shaker is clean and calibrated periodically.
Can I use the YR05796 in high-temperature environments?
The YR05796 can operate in temperatures ranging from -10 °C to 65 °C, making it suitable for various laboratory conditions.
What are the common issues faced with the YR05796?
Common issues include power connection failures, overload errors, and inconsistent readings, which can often be resolved with troubleshooting steps outlined in the manual.
How can I purchase spare parts for the YR05796?
Spare parts can be purchased through authorized suppliers or directly from the manufacturer. It’s advisable to keep a list of essential spare parts on hand for quick replacements.
Is there a warranty on the YR05796?
Yes, the YR05796 typically comes with a warranty that covers manufacturing defects. Be sure to check the specific warranty terms provided at the time of purchase.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.